Nice appearance Meter box installation instructions
Installation Environment
1. Ambient temperature -25°C～+50°C, and average temperature within 24 hours does not exceed +35°C
2. Clean air, daily average relative humidity does not exceed 95%, monthly mean value does not exceed 90%
3. The meter box should be installed vertically and the angle of inclination should not exceed 5°
4. The installation site should be chosen where there is no violent vibration, shock, or insufficient corrosion of electrical components
5. Because the materials used in the meter box are not resistant to alkalis, oxidizing acids, amines, and ketones, and are soluble in chlorinated hydrocarbons and aromatic solvents, they should not be used in contact with or used with these chemical substances
6. During usage, the surface of the meter box should be maintained and cleaned. Sharp objects and hard objects should be avoided from scratching the surface of the meter box
7. In order to extend the service life of the meter and the switch in the meter box, the meter box should be installed in a cool and dry place to avoid direct sunlight for a long time. It is recommended that the meter be installed indoors. The outdoor installation must select the back surface of the building and there should be shelter on the top to prevent the high wall rainwater from soaking and scouring in the event of heavy rain
Installation Instructions
1. The fixed position used in the meter box to be fixed on the wall or on the cross pole is inside the box, so the box must be opened before installation, the two fixing screws on upper cover located under the middle of the meter box must be removed firstly, and then open the box according to the instruction here.
2. According to the position of the installation hole, the installation hole will be made in the corresponding wall position, Then the expansion tube is placed, and fixed the base to the wall, then installed upper cover.
